The adjustment method of servo tension device and the use of attention
Compact design, compact structure 1, in a variety of positions in order to work.
2. Installation structure simple, the output torque adjusting convenient. Damping plate and the magnet are not in contact, no sliding friction, so use long life, tension control and simple operation.
3 magnetic damper aka tension controller, tension device or brake device in the medium of magnetic field transfer constant torque.
4 mechanical servo tension device installed in the rotating force should not be too large, will affect the firmness of the inserts.
5 to prevent the fall servo tension device, can damage the ceramic element and shell.
The 6 tension rod installation locking screw shaft alignment to plane.
The model does not match the 7 line when using don't use.
8 is strictly prohibited to join any oil damping wheel.
9 don't open the self adjustment.
10 often replace wool ring, so as not to plug the line mouth.
11 over the line wheel is abnormal or not please timely replacement, because the bearings have been worn.
12. The damping wheel if rotating slip, please dip in alcohol cotton pulling, rubbing and the damping wheel in the O-ring, this can remove paint envelope residues in wax and dirt on the inside of.
At the end of the production site to maintain a clean, long period of dust backlog of easy to wear tension device components.
