The following is what we need to pay attention to the use of servo tension device, but also when there is a problem we can refer to the solution.
1. Please do not touch the tension bar and tension wheel in the working condition;
2, prevent the tension device from falling, as well as to avoid the damage caused by a strong impact;
3, winding speed should not exceed 5 m / sec; winding machine starting speed should not exceed 1 m / s.;
4, enameled wire through the anti jumper and passing line wheel, must check for paint envelope are hung on each wheel, ensure that the guide wheel can work in normal rotation without being stuck in;
5, a tension wheel can not have oil, otherwise it will affect the normal use, such as a sticky oil, usable cotton dipped in alcohol and in the groove of the tension wheel back and forth pull cleaning the grease O-ring.
6, according to the use condition, regular cleaning and replacement of tension device of wool, to ensure the normal working tension.
