Product name：SET-BR series servo tension device
Product ID：154912-239
Description
Servo tension device SET
Servo type tension device is by the traditional passive wire feeding mode changed to take the initiative to send the line, according to the requirements of users can choose to adjust the tension of the tension device is divided into two segments, by replacing the spring tension range value can be from 1 g - 1000g, and comes with tension feedback stabilization system and can automatically realize the tension stable equilibrium. The tension is not affected by the winding speed, cover, pulley, blankets and other factors, especially the tension stable, simple and convenient adjustment.
Model specification:
|
Model
|
Applied wire diamiter (mm)
|
Tension scope (g.f)
|
|
SET-100BR
|
φ0.01—φ0.12
|
1g—100g
|
|
SET-200BR
|
φ0.02—φ0.17
|
2g—200g
|
|
SET-300BR
|
φ0.03—φ0.22
|
5g—300g
|
|
SET-500BR
|
φ0.05—φ0.32
|
20g—500g
|
|
SET-600BR
|
φ0.06—φ0.35
|
20g—600g
|
|
SET-1000BR
|
φ0.10—φ0.45
|
30g—1000g
|
Matters needing attention:
Please choose the value of tension tension rod and spring to use;
Do not touch the drive and rotating parts and stop tension bars when using the tension device;
Do not use hand to touch the tension sensor, in order to avoid damage to the tension sensor, affect the accuracy of the actual display of tension (only with tension display model);
To prevent the tension device from falling, and to avoid the damage caused by a strong impact;
Winding speed should not be more than 5 m / s, as far as possible in the winding machine starting time will set a certain speed or set a few slow start (start speed should not be more than 1 m / sec).
The enamel covered wire passes through the ceramic ring, and the relevant parts of the tension device are sequentially through the path of the dotted line of the outline structure;
- lacquer package line through the wool felt ring, opened above felt, clamp the paint envelope, also available dust-free cloth clamp paint envelope then felt pressure, which can prevent the enameled wire and screw friction and avoid frequent contact with the change of felt. The safety clip force felt part must adjust the felt, general adjustment for enameled wire tension safety 5%.
- lacquer envelope by anti jumper and a line wheel, we must correctly recognize paint envelope are hung on each wheel, ensure the wheel to the normal rotation without getting stuck.
- in a tension wheel can not have oil, otherwise it will affect the normal use, such as sticky sticky cotton available anhydrous alcohol, on the tension wheel back and forth pull up o ring
